Heavy 10mm Pistol and Handgun Ammo

Heavy 10MM Ammo
180 gr. Jacketed Hollow Point - (1,350 fps/M.E. 728 ft. lbs.)
20 Round Box

ITEM 21B

The Buffalo Bore Heavy 10MM ammo results from many years of customers' requests that we produce several such loads for the 10MM.

These loads bring out the full potential of the 10MM but operate at standard pressures and are safe to use in any standard 10MM pistol. Please don't phone us and ask if these loads are safe in your 10MM - THEY ARE SAFE--provided your 10MM is a normal operating pistol in good condition.

We are using flash-suppressed powders so your vision will not be materially affected should you be required to drop the hammer in low light.

If you are firing this 10MM ammo from an autoloader and experience high extreme spreads in velocity, it is not the ammo. Here is why and how to remedy the situation.

FULL POWER 10MM AMMO

Full-power 10MM ammo has always generated enough recoil and pressure to require a pretty stiff recoil spring in your handgun - this, of course, depends on several variables such as your slide weight, etc. When the cartridge fires, it generates enough pressure/recoil to prematurely open your breech face in some guns. When this happens, the opening breech face has an effect on the burn rate of the powder. This can result in some fairly high extreme spreads in velocity. If you are experiencing extreme velocity spreads of more than 50 fps, simply install a stiffer recoil spring.

FOR EXAMPLE

I have an original Colt Delta Elite. This gun with the factory spring runs extreme spreads of about 35fps with both of these 10MM loads. I am happy with 35 fps, so I leave the Delta Elite. I also have a custom-built Para Ordnance with a Nowlin barrel. It runs extreme spreads of about 70 fps with its original recoil spring. When I install a spring that is 4 lbs stiffer, the extreme spread drops to about 35 fps. Of course, none of this will be an issue in a revolver. None of this will be an issue in real life either, as these high-extreme spreads don't hurt accuracy or function. However, I mention this because if you are like me and want things to be as correct as possible, I have outlined the problem and the solution. The industry fixed all these problems initially by watering down the 10MM ammo over the last several years. The watered-down 10MM ammo does not generate the pressure/recoil to open the breech face early. If you want the full-powered 10MM ammo we make, you simply need to tweak your pistol. Or just realize that you are getting some fairly high extreme spreads and ignore it or live with it. It's not hurting anything in reality.

Item 21B - Exterior Ballistics Charts for several Muzzle Velocities

_______________________________

Muzzle Velocity @ 1600 fps for Item 21B

Muzzle Velocity @ 1500 fps for Item 21B

Muzzle Velocity @ 1400 fps for Item 21B

Muzzle Velocity @ 1300 fps for Item 21B

Muzzle Velocity @ 1200 fps for Item 21B

Muzzle Velocity @ 1100 fps for Item 21B

Field Proven pistol and handgun ammo. Maximum firepower ammo. Best ammunition for pistols and handguns for sale. Buffalo Bore. Strictly big bore. Strictly Business.

Attention!
You must be 18 or older to order ammunition. Ammunition must ship UPS ground. Due to Department of Transportation regulations, we cannot accept returns on Ammunition. Make sure to use the correct ammunition in your gun. Check local laws before ordering.